Tutorial: Heart Chicken Wire Memo Board
Today, I'm excited to be sharing the first of two tutorials for projects that I made that were on display at the Creativation show last month in the Buttons Galore booth. This heart chicken wire memo board was so fun to make, and I so enjoyed sharing it with so many people at the show!
[Disclaimer: My company, Nally Studios, is the social media & blog manager for Buttons Galore. I am also part of blogger programs for Cricut and Plaid, who provided some product used in this article. This site is a participant in the Amazon.com affiliate program. Some links in this article are affiliate links that pay this site a commission at no cost to you if you make a purchase after clicking.]
Chicken wire is so hot for home decor, but using it doesn't mean you have to create a design that is "farmhouse" looking. This bright, colorful heart chicken wire memo board will fit right in when it is hung up in my teenage daughter's bright pink bedroom, and will be a great place to hang cards and pictures.
Supplies Needed:
1/4" x 2' x 2' Birch Plywood Sheet
Cricut Explore Machine (Amazon.com, Scrapbook.com)
Plaid FolkArt "Vintage Victorian" Home Decor Chalk Paint (Amazon.com)
2 - Buttons Galore "Bubblegum" Button Bonanza (Amazon.com)
28 Lilac Lane "Hello, Cupcake" embellishment kit (Scrapbook.com)
white glue
Low Temperature Hot Glue Gun
M-D Hobby & Craft Chicken Wire (Amazon.com)
2" masking tape
Duck Tape
Wire cutters
scrap cardstock (for making template)
sandpaper
drill
This chicken wire memo board project is entirely made from scratch, cut from a sheet of plywood. The great thing about doing it that way is that it can be made to exactly the size that will work for the space that you have! (My heart is about 17" high.)
To start this project, I needed a template to work from. If you have a steady hand, you could hand draw your cutting outlines on the plywood, but I prefer working with a template. To create my template, I used the basic shape tool in my Cricut Design Space Software to draw two hearts and merged them. Then, since my template was larger than the cut area on my Cricut, I used the rectangle tool to slice my heart into sections. Then I cut out all of the pieces and taped them back together to make my template!
After I made my template, I used it to trace an outline on my sheet of plywood. Then I cut out the heart outline with my jigsaw. To cut out the inside of the heart, I drilled a hole first with my largest drill bit. That gave me a place to insert my jigsaw blade as a starting point, and then I worked my way along the inside of the outline.
The 1/4" plywood is surprisingly easy to cut and a heart is just gentle curves and straight lines - don't be intimidated! (Don't forget your safety glasses!)
Once the shape was cut out, I cleaned up the edges and the surface with sandpaper. Then I painted it with a beautiful shade of pink called "Vintage Victorian" from the Plaid FolkArt Home Decor Chalk Paint line.
After the paint was dry, I started on the button collage. It's time consuming to do a collage like this, kind of like doing a jigsaw puzzle that you don't have a picture for, but I find it kind of zen and relaxing. Having the background be painted is a little cheat - it gives room for error and allows the project to still look right if an area of buttons doesn't quite fit together correctly. Working in short sections and then letting the glue dry before going further is best to minimize the risk of inadvertently shifting buttons out of position while you work.
Let the front dry completely before starting to work on attaching the chicken wire, to make sure everything is secure!
The chicken wire is a bit stabby to work with but if you are careful it's possible to get it applied without too much trouble. The most important thing in this step to getting a nice finished piece is making sure that the chicken wire is pulled nice and flat and tight.
I started by cutting a piece of chicken wire that was just a bit larger than my heart. Then I worked in small sections attaching it to the back with hot glue, and pressing masking tape down over the hot glue immediately. (Thanks to Teryn at Vintage Romance Style for the no staple technique!)
Once I did one area, I went across to the opposite side and pulled the wire tight and did that area. Then I picked another spot and went opposite it. I worked my way around the whole heart by going back and forth.
After all the glue was dry and cool, then I clipped off as much as I could of the wire pieces that were hanging out, leaving one loop of wire at the top of each curve of the heart to attach a hanger to.
I could have stopped there on my chicken wire memo board, and just attached a hanger, but my perfectionist side wasn't happy with the messy looking back and wanted to make it look a bit prettier. So I got out a roll of Duck Tape I had on hand (conveniently in pink that matched my project). Laid down in short sections on the back of the heart, it both covered the masking tape & hot glue mess and sealed in stray ends of wire that could poke.
For the final touch, I cut a piece of ribbon from the 28 Lilac Lane kit to use as a hanger and looped it around the wire I had left exposed. A drop of hot glue adhered the ribbon loops in place.
This same technique can be applied to any shape or size chicken wire memo board....just draw or create a template for the design that you want! What shape do you want to make?